[ About ]
[ Batspeed Research ]
[ Swing Mechanics ]
[ Truisms and Fallacies ]
[ Discussion Board ]
[ Video ]
[ Other Resources ]
[ Contact Us ]
Re: Re: Scapula load


Posted by: tom.guerry (tom.guerry@kp.org) on Fri Oct 31 13:14:21 2003


For a good explanation on the difference between scapula loading and counter rotation see the following
>
> http://www.setpro.com/ubb/ultimatebb.php?ubb=get_topic;f=34;t=000046

As seen in this thread I have a slightly different take from Paul Nyman on this overall issue.Unfortunately this gets into the guru wars so be careful (I am by no means a guru,but I aggravate them quite well on occasion.I may be dangerous,but I don't claim to be an expert.Reader beware.Insert your desired disclaimer here).

I believe more than scap loading is necessary to connect well and prevent dragging.I also believe some degree of "counter rotation" of the TORSO is necessary,because without SOME (not a lot) you can not rotate around around a stable axis effectively.I do NOT,however think you define "counter rotation" as turning the SHOULDERS back via twisting the top of the spine significantly back.You do have to turn/coil the lower/mid TORSO some.After an overall SLIGHT inward turn,the torso has to turn/continue back a little as the stride leg goes out and the hips stretch open.This can/should be done with a minimum of displacement,and certainly the head should not have to turn back.It(torso turns back as hips open-"counter-rotation") is observable in my experience of many hitters with high resolution video.It is easy to/should be "felt" as "winding the rubber band"(cue associated with Epstein which irritates some gurus)as the scap loads during the early forward portion of the stride.It is seen well on the guerrero clip.Hank Aaron said "you have to coil,but don't take a backswing"

In addition to loading the back scap and keeping it loaded, as the back elbow drops primarily via external rotation (synchronized with external rotation of the stride leg for good coiling/loading)the back arm also needs to be stable in the shoulder socket.The arm(not scap) should not adduct or flex,or there will be disconnection and bat dragging as the back elbow slides out of the slot forward to the belly button.

The sequence requires the synchronized back arm and lead leg external rotation immediately following scap load/TORSO counterrotation, and then well coordinated elevation of the lead elbow VIA internal rotation to create a stable shoulder/arm/hand ("box") configuration to prevent dragging with launch.This phase between torso counter-rotation/scap load on the one hand and "drop and tilt" on the other creates the first part of "prelaunch" tht which keeps the hands back,keeps the body loading,but without any further/excessive counter-rotation/backswing.

This is the same sequence for the most part up to this point as in the overhand throw.Some scap load/counter-rotation is followed by "stepover" and uncocking of the hip/arching of the back before the torso turns or the head comes forward as it does in throwing(head forward is an additional phase in throwing,head stays back in hitting).


Followups:

Post a followup:
Name:
E-mail:
Subject:
Text:

Anti-Spambot Question:
This MLB Stadium is in Boston?
   Yankees park
   Three Rivers
   Safeco Park
   Fenway Park

   
[   SiteMap   ]