[ About ]
[ Batspeed Research ]
[ Swing Mechanics ]
[ Truisms and Fallacies ]
[ Discussion Board ]
[ Video ]
[ Other Resources ]
[ Contact Us ]
Re: RE: APR - Soft toss vs Heavy bag


Posted by: RQL () on Fri May 4 11:48:26 2001


>>> hi jack
>
> my question is why wouldnt come out with a tape that deals with drills with a baseball with all due respect for example soft toss and etc.. for rotational mechanics instead of a bag how come? <<<
>
> Hi Somebody
>
> One of the main problems with developing more efficient mechanics is overcoming old muscle memories. Most batters are predominately “back side” hitters, meaning they rely to heavily on the back hip, shoulder and arm to swing the bat. It is much easier to learn mechanics that utilizes both the back and lead side when the batter is concentrating on hitting a bag instead of a live ball (even soft-toss).
>
> With average (back-side) batting mechanics, the batter develops much of their bat speed after passing the optimum contact point. They have little power to the opposite field and many of their well-hit balls are pulled foul. Placing the bag so the contact point is moved deeper into the strike zone encourages the batter to develop better lead-side mechanics that will generate bat speed earlier in the swing. -- This bag placement will also help a hitter with a lunging problem. He will soon learn to shorten his stride and use more shoulder rotation in his swing.
>
> These are just a few reasons I find hitting a heavy bag preferable to swinging at live balls. Especially when the batter is working on developing new mechanics. Once the batter is able to attain the proper form at contact (lead knee extended, lead shoulder pulling back, back leg and arm forming the “L” position) you can start working on soft toss. But when most batters return to live balls they also tend to revert back to their old mechanics. So you must go back and forth between the bag and live balls until the new mechanics replaces old muscle memories.
>
> Trying to replace old swing habits in the batting cage takes much longer and it requires a frame-by- frame video to gage the batter’s progress. With the bag you can easily check the batter’s form at contact. --- The soft-toss must come from the front – not a sharp side angle. If you toss the ball from the side where the batter must extend out to make contact you will be causing the batter to use exactly the mechanics we are trying to change – less rotation and more arm extension.
>
> Below is a post I made earlier regarding a drill I use to teach rotational principles to batters.
>
> >>> The drill I find most effective in getting hitters to use more body rotation in their swing is what I call “The welded wheel drill.” This drill will require the use of a bag (as described in a thread below) to absorb the bat’s energy. The bag will also offer a contact point or a point by which maximum bat speed should have occurred. Any energy expended by body or arms after contact will have no effect on how hard the ball is hit. The presence of the bag will cause the batter to develop bat speed earlier in the swing.
>
> I call it “The welded wheel drill,” because the arms remain in a fairly fixed position (welded) as the body rotates. I have the batter assume the body and arm position of a good swing at contact. The shoulders and hips are fully open (lead shoulder pulling back toward the catcher) and facing the pitcher. The lead-leg is fully extended with the back-leg forming the “L” position. The lead arm is fairly straight and across the chest. When the bat is in contact with the bag the back-arm will form the “L” position.
>
> From this contact position you have the batter use his/her legs to rotate the body and the bat back around until they are facing the plate. The position of the arms should remain fixed as the body rotates back. The batter may add some cock to the bat by flexing the wrist. The legs will now assume the position they would have in the launch position. Without moving the arms, have the batter use their legs to rotate the body and the bat back around to the contact point. They should now have the good power position they started with. --- It is important that the batter transfers all rotational and torque energies by the time the bat reaches contact. Any energy not transferred by contact is wasted. Having transferred all energies, the body and limbs should be relaxed and at rest at contact.
>
> I think your players will be very surprised at the power and bat speed they can attain without using the arms and it will definitely help them to use more body in their swings. <<<
>
> Jack Mankin
>
>
>Jack,the bag is a great trainer , however I use a tire on a tree for the same affect.What I have been doing as a transition with some of my students is going from tire to straight soft toss, tossing balls next to the tire so they can learn a little timing while their focus is still on mechanics and they see how they end up at tire contact.
>If something changes in swing you can see it better.


Followups:

Post a followup:
Name:
E-mail:
Subject:
Text:

Anti-Spambot Question:
This is known as hitting for the cycle in a game?
   Single, double, triple, homerun
   Four singles
   Three homeruns
   Three stikeouts

   
[   SiteMap   ]